» Entry-level Water Detection module:  Mini AquaTek and AquaTek+Plus

The Mini AquaTek is an entry level ‘black box’ miniature Water Leak Detection Alarm designed as stand-alone module to provide an alarm signal to a Building Management System or other Remote Alarms. This unit can be linked to a nursecall type alarm systems and could be the ‘sensor module’ for ‘wireless’ or ‘SMS’ Water Detection Systems. 

The more comprehensive AquaTek+Plus (shown left) is fitted with an LED Alarm Indicator, an internal Sounder and an external Mute Button. The AquaTek+Plus can also be provided with an extra loud sounder in a twin-gang housing.

Both AquaTek units can be powered from an external mains power supply, low voltage power supply and, as a separate unit, from a 'PP3' Battery. All units can provide an output signal via optional on-board relay changeover contacts rated 230VAC 2amp.

The AquaTek can be flush mounted in a pattress housing or optionally surface mounted in a single-gang housing. The single-gang housing has rear and sideway knockouts, or can be fitted with standard glands. 

The AquaTek is designed to monitor for water leaks from Aqualeak Sensor Cables or Tapes, Sensor Pads, Sensor Probes, and other specialised Aqualeak Sensors. The AquaTek module would require to be connected to the water detection sensor/s by a Leader Cable. 

The Leader Cable distance between the AquaTek and the Sensor/s, or the maximum linear Sensor Cable sensing distance, should not exceed 30m