» Four Channel Automatic Telephone Dialling Unit : AutoCall

The Aqualeak AutoCall Automatic Telephone Dialling Unit is a British Telecom approved self-contained mains-powered analogue Autodial which can be triggered from up to four entirely separate Alarm inputs and to send out either a pre-recorded voice message or a SMS Text message. 

The AutoCall can be programmed to automatically telephone up to ten separate recipient telephone numbers. Once an alarm input has been activated, the AutoCall will dial the number and play the 'site address' message and then the appropriate 'alarm' message to the first Recipient who, on hearing the message, can acknowledge the call by pressing a key on his own tone telephone and thereby stop the message being transmitted to the others.  

If nobody acknowledges the message, the message is repeated four separate times on each call and all recipients are called a total of three times before the system closes down. The unit retains a log of the last successful call.

As the AutoCall is analogue, no modems, central stations, external monitoring organisations or monitoring fees are involved. Unlike many 'dialler modules' which require low voltage power supplies from elsewhere, the AutoCall unit is a mains-powered system which has its own regulated power supply unit and which can also be supplied with an optional Battery Backup Pack. The Unit requires connection to the mains supply, has connection terminals for the alarms being monitored, and has a plug connection to the telephone line.

It is beneficial at all times to provide a dedicated telephone line to the system to ensure complete exclusivity. The AutoCall system would require to be programmed with up to ten recipient telephone numbers via the integral keyboard, and requires to have the 'alarm' messages recorded directly via an on-board microphone/speaker, none of which requires any specialised equipment or knowledge.