Water Leak Detection   •   Oil Leak Detection   •   Environmental Alarms
t: +44 (0)1249 715698
e: enquiries@aqualeak.com

Septic Tank Alarm

Septic tank alarm

SMS Text Messaging Alarm Panel

The SMS alarm panel works using any standard mobile SIM card and will allow a text message to be sent to up to five different phone numbers. The panel has four alarm inputs and can be connected to a high level float switch and a pressure switch to detect loss or air blower pressure. The SMS alarm panel comes with a built in mains fail detector and a battery backup that will keep the panel online for up to 48 hours.

  • SMS text messaging for up to five different phone numbers
  • No fixed telephone line required
  • Easy set up via SMS messaging, can be done remotely

On receiving an alarm signal the SMS will dial out to the first designated phone number listed and send the relevant user defined text message. Should this number not acknowledge the message has been received, it will then try the next number and continue until all 5 designated numbers have been called. Each alarm input can have a bespoke message to help identify what the situation is enabling the recipient to react in an appropriate manner from anywhere in the world.

  • Typical applications include sewage treatment plants, pumping stations and biological treatment plants.

There is an optional remote pump reset function and the alarm panel can be supplied with a fashing beacon and klaxon alarm. 

Specification
Dimensions: 213 x 185 x 102mm
Voltage Supply: 230VAC
Maximum Inputs: 4
Maximum Outputs: 5 phone numbers
Options: Solar Powered

Accessories

AR1 Single Zone Remote Repeater Alarm

The AR1 remote repeater will provide an audio and visual output that mimics the alarm output from the host alarm panel.

The AR1 also has the capability to onward signal to an autodialler or BMS via an optional volt-free relay contact. Can be used with the FloodStoppa, AquaTek, SMS Alarm, Klaxon Alarm and the SMS Temperature panels.  AR1 Single Zone Remote Repeater Alarm Details
Beacon and Sounder

The beacon/sounder unit has a load audible output (105dB at 1m) and a bright flashing beacon that will trigger when an Aqualeak panel goes into alarm.

This unit can be located in an area that gives a better opportunity to react to an alarm such as outside the room being protected or on the outside of the building. The effective range for the sounder is 32m from the position of the beacon/sounder. Beacon and Sounder Details
To request more information please complete the form below.

Our experienced team are here to help. Contact us to discuss your application.
+44 (0)1249 715698
Mon - Fri
8:00 am - 5:00 pm
copyright 2017 Aqualeak Detection Ltd
web design by intechnia