Water Leak Detection   •   Oil Leak Detection   •   Environmental Alarms
t: +44 (0)1249 715698
e: enquiries@aqualeak.com

TempTek 2 Over-Temperature Environmental Alarm

TempTek 2 Over Temperature Alarm

Two Stage Over-Temperature Alarm.

The TempTek2 is a 2 zone over-temperature detection system that allows the monitoring of temperature in 2 different locations . This can be used to monitor 2 rooms from a central point or to set an upper and lower temperature band between 5 - 30⁰C.

  • Compact and economical 2 zone temperature monitoring system.
  • Local audio and visual alarm signals to show which zone is in alarm.
  • Can be configured to monitor an upper and a lower limit.

The TempTek2 alarm panel can be located inside or remotely to the room/s being monitored. The maximum and minimum trigger temperatures are fully adjustable and more than one temperature sensor can be connected to each zone on the panel. When the maximum or minimum set temperature has been exceeded the TempTek2 goes into an alarm state, sounding an audible signal and illuminating an LED on the panel to show which zone is triggered. At the same time the volt free changeover relay switches, which can be used to switch off pumps or signal to a BMS.

Typical applications include computer rooms, data storage centres, comms rooms, server rooms and
plant rooms.

Dimensions: 120x120x60mm
Power Supply: 230VAC
Power Usage: 50mA
Audibility: 85db at 10cm
Relay Rating: 230VAC 8 amp
Max Temperature Range: 5 - 30⁰C


Temperature and Humidity Sensors

Aqualeak environmental alarms use temperature and humidity sensors to monitor critical areas where over temperature and humidity will have a detrimental effect on a process or operation of equipment.

There are two versions of the temperature sensor offer a range between 10⁰ - 30⁰C and a humidity sensor that will measure between 35% and 100% RH. Temperature and Humidity Sensor Details
AR4 Multi Zone Remote Repeater Alarm

The AR4 remote repeater can be used to repeat up to 4 individual alarm panels or a multizone alarm panel with up to 4 zones.

This remote repeater has individual visual alerts and an audio output to offer easy reference to the location of the alarm. Can be used with the AquaTek, AquaTraq, FloodStoppa, OGW, OTF, OTMA and AquaTek4, TempTek4 alarm panels. AR4 Multi Zone Remote Repeater Alarm Details
Autocall Telephone Dialling Unit

The AutoCall automatic dialing system can dial out to 10 different telephone numbers and plays a voice message to inform the recipient that there is an alarm.

There are four alarm inputs and a different message can be assigned for each channel. The Autocall will work with any of the Aqualeak alarm systems via a volt free contact.  Autocall Telephone Dialling Unit Details
SMS Alarm

The SMS alarm can be used to send text messages to up to five different phones when an alarm is triggered.

Up to four different devices can be connected to the alarm inputs and a bespoke message for each transmitted. Works with any mobile network SIM card and requires no fixed telephone line to operate making it ideal for working in remote locations. SMS Alarm Details
Beacon and Sounder

The beacon/sounder unit has a load audible output (105dB at 1m) and a bright flashing beacon that will trigger when an Aqualeak panel goes into alarm.

This unit can be located in an area that gives a better opportunity to react to an alarm such as outside the room being protected or on the outside of the building. The effective range for the sounder is 32m from the position of the beacon/sounder. Beacon and Sounder Details
To request more information please complete the form below.

Our experienced team are here to help. Contact us to discuss your application.
+44 (0)1249 715698
Mon - Fri
8:00 am - 5:00 pm
copyright 2018 Aqualeak Detection Ltd
web design by intechnia