Water Leak Detection   •   Oil Leak Detection   •   Environmental Alarms
t: +44 (0)1249 715698
e: enquiries@aqualeak.com

OTF Environmental Alarm

OTF Environmental Over-temperature Alarm

Over Temperature Detection Alarm

The OTF is a single zone temperature monitoring system specifically designed for Computer Rooms (and other similar technical areas) that require notification to the BMS when the temperature reaches more than a pre-set limit.

  • Monitors temperatures between 5 to 30⁰C
  • Two versions available BMS OTF and the OTF+
  • The OTF can be connected to an Aqualeak Solodial telephone system

On detection of a temperature above the user defined maximum, the OTF will immediately go into alarm. When this occurs the BMS OTF, which has no local alarm outputs, simply switches the volt free changeover relay and alerts the BMS to the situation. The OTF+ on the other hand has the same
functionality as the BMS OTF with the addition of a local audio and visual alarm situated on the control panel.

  • Typical applications include computer rooms, comms rooms, server rooms, data centres and plant rooms.

The OTF can be connected to a tamper proof temperature sensor or a digital display temperature sensor. It is also possible to connect the OTF to an Automatic telephone dialler to call up to 10 telephone numbers and alert the recipient to the alarm.

Dimensions: 127 x75 x 45mm
Power Supply: 230VAC
Relay Rating: 1 x 230VAC 2 amp
Max Sensing Distance: 50m
Temperature Range: 0 - 30⁰C


Temperature and Humidity Sensors

Aqualeak environmental alarms use temperature and humidity sensors to monitor critical areas where over temperature and humidity will have a detrimental effect on a process or operation of equipment.

There are two versions of the temperature sensor offer a range between 10⁰ - 30⁰C and a humidity sensor that will measure between 35% and 100% RH. Temperature and Humidity Sensor Details
RA Remote Repeater Alarm

This is a miniature alarm repeater designed as a stand-alone module and can be linked in series to repeat an alarm condition in several locations at the same time.

The RA remote repeater panel can accept an alarm signal from any no-volt relay output. Can be used with the Waterbug, AquaTraq, OTF, OTMA, RGO, Oilbug and Redeye1 alarm panels.  RA Remote Repeater Alarm Details
Solodial Telephone Dialling Unit

The SoloDial automatic dialing unit can dial out to up to eight different telephone numbers to alert the recipient that there is an alarm.

The SoloDial automatic dialing unit can dial out to up to eight different telephone numbers to alert the recipient that there is an alarm. Solodial Telephone Dialling Unit Details
SMS Alarm

The SMS alarm can be used to send text messages to up to five different phones when an alarm is triggered.

Up to four different devices can be connected to the alarm inputs and a bespoke message for each transmitted. Works with any mobile network SIM card and requires no fixed telephone line to operate making it ideal for working in remote locations. SMS Alarm Details
Beacon and Sounder

The beacon/sounder unit has a load audible output (105dB at 1m) and a bright flashing beacon that will trigger when an Aqualeak panel goes into alarm.

This unit can be located in an area that gives a better opportunity to react to an alarm such as outside the room being protected or on the outside of the building. The effective range for the sounder is 32m from the position of the beacon/sounder. Beacon and Sounder Details
To request more information please complete the form below.

Our experienced team are here to help. Contact us to discuss your application.
+44 (0)1249 715698
Mon - Fri
8:00 am - 5:00 pm
copyright 2018 Aqualeak Detection Ltd
web design by intechnia