TempTek Environmental Alarm

TempTek Overtemperature (High Temperature) Environmental Alarm

Entry Level Over-Temperature Alarm.

The AquaTek is the entry level over-temperature detection system. The system is configured by connection to a room temperature sensor and can monitor between 0 - 30⁰C.

Compact and economical entry level temperature monitoring system
Local audio and visual alarm signals
A volt free relay output allows onward connection to other systems such as a BMS

The TempTek alarm panel can be located inside or remotely to the room being monitored. The maximum trigger temperature is fully adjustable and more than one temperature sensor can be connected to one TempTek panel. When the maximum set temperature is reached the TempTek
immediately goes into an alarm state, sounding an audible signal and illuminating an LED on the panel. At the same time the volt free changeover relay switches and a signal can be sent to a BMS for example.

Typical applications include computer rooms, data storage centres, comms rooms, server rooms and plant rooms.

Specification
Dimensions:	80x80x55 mm
Power Supply:	230VAC
Power Usage:	30mA
Audibility:	85db at 10cm
Relay Rating:	230VAC 2 amp
Max Temperature Range:	0 - 30⁰C

Accessories

Sensors

	Aqualeak environmental alarms use temperature and humidity sensors to monitor critical areas where over temperature and humidity will have a detrimental effect on a process or operation of equipment.
	There are two versions of the temperature sensor offer a range between 10⁰ - 30⁰C and a humidity sensor that will measure between 35% and 100% RH.

AR1 Repeater

	The AR1 remote repeater will provide an audio and visual output that mimics the alarm output from the host alarm panel.
	The AR1 also has the capability to onward signal to an autodialler or BMS via an optional volt-free relay contact. Can be used with the FloodStoppa, AquaTek, SMS Alarm, Klaxon Alarm and the SMS Temperature panels.

Solodial Auto Dialler

	The SoloDial automatic dialing unit can dial out to up to eight different telephone numbers to alert the recipient that there is an alarm.
	The SoloDial automatic dialing unit can dial out to up to eight different telephone numbers to alert the recipient that there is an alarm.

SMS Alarm Auto Dialler

	The SMS alarm can be used to send text messages to up to five different phones when an alarm is triggered.
	Up to four different devices can be connected to the alarm inputs and a bespoke message for each transmitted. Works with any mobile network SIM card and requires no fixed telephone line to operate making it ideal for working in remote locations.

Beacon-Sounder

	The beacon/sounder unit has a load audible output (105dB at 1m) and a bright flashing beacon that will trigger when an Aqualeak panel goes into alarm.
	This unit can be located in an area that gives a better opportunity to react to an alarm such as outside the room being protected or on the outside of the building. The effective range for the sounder is 32m from the position of the beacon/sounder.

To request more information please complete the form below.

Name:
Email:
Tel No:
Request Info About : TempTek Environmental Alarm

Our experienced team are here to help. Contact us to discuss your application.

+44 (0)1249 715698

enquiries@aqualeak.com

Mon - Fri
8:00 am - 5:00 pm

terms & conditions

web design by intechnia