» Four Zone Domestic/Industrial Water Shut-off System: Flood Stoppa 4

The Flood Stoppa 4 is a miniature sophisticated four zone Water Leak Detection System designed for in larger houses or flats with multiple bathrooms, en-suites and kitchens. The Flood Stoppa shuts off a water solenoid valve if a water leak is detected. Also suitable for smaller industrial premises with several wet areas. The System advises audio/visually which zone has gone into alarm and can provide appropriate alarm signals to a Building Management System or other Remote Alarms. 

The Flood Stoppa 4 System comprises a mains powered control unit, a 240V solenoid valve, the interlinking cables, and the water sensors. Solenoid Valve sizes are to order, and can be either 'normally open or closed'. The valve would need to be fitted in the water supply pipework on entry to the building or the monitored area. The valve will shut off the water supply on any zone detecting water, and will hold it shut until the water is cleared. 

Four Leader Cables provided a link between the control panel to the water detection sensors. The Flood Stoppa 4 is can monitor for water leaks from Aqualeak sensor cables, sensor pads, sensor probes, and other specialised sensors. The leader cable distance between the Flood Stoppa 4 and the sensor/s, or the maximum linear sensor cable sensing distance, should not exceed an overall total of 30m. 

Each zone of the Flood Stoppa 4 is provided with local audible and visual alarms via zone LED Alarm Indicators, an internal Sounder and an external Mute Button. Additionally, each zone is provided with individual zone sensitivity adjustment to allow for specific site conditions.

The System is also provided with a 'valve shutdown override' feature. If the leak is of a manageable nature, it is possible to override valve closure by pressing the latching button. This will override the water detection circuit and immediately re-open the valve.