Water Leak Detection   •   Oil Leak Detection   •   Environmental Alarms
t: +44 (0)1249 715698
e: enquiries@aqualeak.com

RGO Multi-zone Oil Leak Detector

RGO Oil Leak Detector

Multizone Oil Leak Detection

The RGO can offer multizone leak detection monitoring for up to 32 individual areas. The RGO utilises the Redeye Sensor and can detect the presence of oil, diesel and some chemicals and acids.

  • Multizone leak detection system with audio and visual alarm
  • Comes with 2 common alarm volt free changeover relays for onward signalling
  • Battery backup available allowing the system to remain functioning after a power out

The early detection of oil leaks is essential in preventing large losses of liquid which could potentially lead to dangerous situations and costly reparation. On detecting the presence of oil, diesel or chemicals, the Redeye sensor sees a change in the refractive index of the surface; this immediately puts the system into alarm. When in alarm an audio warning is sounded and a visual output illuminates relating to the particular zone where the leak has occurred.

Typical applications include oil/diesel storage tanks, fuel feed pipelines, boiler houses and plant rooms. 

Dimensions (mm): 255W x 215H x 125D
Power Supply: 110/230VAC
Sensor Adjustment: 0mm to 25mm
Sensors: Maximum of 2 per zone
Maximum cable length: 100m
Relays: 240v/2amp – 240v/8amp


Redeye Oil Sensor Probe

The Redeye is an adjustable floor mounted probe and is used for the detection of oil based substances such as diesel and fuel oil.

The Redeye detects any change in the refractive index from the surface it is looking at. Redeye Oil Sensor Probe Details
RAA Multi Zone Remote Repeater Alarm

The RAA remote repeater can be used to repeat from 2 to 128 individual alarm panels or a multizone alarm panel connected to between 2 and 128 zones.

The RAA remote repeater can be used to repeat from 2 to 128 individual alarm panels or a multizone alarm panel connected to between 2 and 128 zones.  RAA Multi Zone Remote Repeater Alarm Details
Autocall Telephone Dialling Unit

The AutoCall automatic dialing system can dial out to 10 different telephone numbers and plays a voice message to inform the recipient when an alarm has been activated.

There are four alarm inputs and a different message can be assigned for each channel.  The Autocall will work with any of the Aqualeak alarm systems via a volt free contact.  Autocall Telephone Dialling Unit Details
SMS Alarm

The SMS alarm can be used to send a text message to up to five different phones when an alarm is triggered.

Up to four different devices can be connected to the alarm inputs and a bespoke message for each transmitted.   It works with any mobile network SIM card and requires no fixed telephone line to operate making it ideal for working in remote locations. SMS Alarm Details
Beacon and Sounder

When positioned on the outside of a room or on the outside of a building, the beacon/sounder can be used to alert that an alarm has been triggered.

It has a very loud klaxon and a bright flashing light that would be difficult to ignore even from a considerable distance away. Beacon and Sounder Details
To request more information please complete the form below.

Our experienced team are here to help. Contact us to discuss your application.
+44 (0)1249 715698
Mon - Fri
8:00 am - 5:00 pm
copyright 2018 Aqualeak Detection Ltd
web design by intechnia