Water Leak Detection   •   Oil Leak Detection   •   Environmental Alarms
t: +44 (0)1249 715698
e: enquiries@aqualeak.com

Valves

Zero Lift Solenoid Valve Range

Zero Lift Solenoid Valves

Aqualeak have a range of solenoid valves to fit pipe sizes of ½” (15mm) to 2” (50mm).  The valves come as a zero lift configuration and do not require a pressure difference between the entry port and the exit.  The valves are supplied normally closed, where by they will shut in the event of a power failure.

  • Valve sizes ½” (15mm), ¾” (22mm), 1” (28mm), 1¼” (35mm), 1½” (40mm), 2” (50mm)
  • Available in 12VDC and 24VDC, 24VAC, 240VAC and 110VAC
  • Can be supplied in brass or stainless steel
Aqualeak zero lift solenoid valves can be fitted to the oil/fuel supply where there is a leak detection system monitoring an area.  If a leak occurs, the alarm panel will trigger an internal relay which will close the valve.
Specification
Valve Sizes: ½” (15mm), ¾” (22mm), 1” (28mm), 1¼” (35mm), 1½” (40mm), 2” (50mm)
Voltage Supply:
12VDC and 24VDC, 24VAC, 240VAC and 110VAC
Temperature Range:
-10 to 80⁰C
Port Thread:
BSP
Min Pressure:
0.0MPa
Max Pressure:
0.8MPa
copyright 2017 Aqualeak Detection Ltd
web design by intechnia