AquaTek - Entry-level Water Detection Module

Entry level leak detection alarm.

The AquaTek is the entry level water leak detection system. Typically designed for domestic or smaller commercial applications, it offers an audio alarm as well as an LED indicator to show that a leak has been detected.

Compact water leak detection system
Can be connected to sensor cables, probes and pads
A volt free relay output allows onward connection to other systems such as a BMS

On detecting the presence of water the AquaTek will go into an alarm status. There are two versions of the AquaTek, the Mini AquaTek, which is essentially a black box that will simply send a signal to the BMS via a relay. The other is the AquaTek Plus, which has the same functionality as the Mini AquaTek, with the addition of a localised audio and visual alarm output . In the event of an alarm the sounder can be muted and the leak investigated, distances of up to 30 metres from the panel can be monitored.

Typical applications include multiple tea points, small and medium sized server rooms and/or combined UPS storage areas, hidden pipework and water storage tanks.

Specification
Dimensions (mm):	80 x 88 x 55
Power Supply:	230 VAC
Power Usage	30mA
Audibility:	85db @ 10cm
Relay Rating:	230VAC 8 amp
Max Sensing Distance:	30m

Accessories

Water Detection Sensors

	Aqualeak offer a wide range of different sensing techniques which will allow you to tailor your leak detection system to suit your application.
	These include sensor cable, sensor probes and sensor pads. The type of sensing method used depends on the environment and requirement you have for leak detection. All the sensors work on the principle that water is a conductive element and can in effect close an open circuit.

Valves

	Solenoid valves are available for controlling the water flow to either switch off the supply in the event of a leak, or switch it on when demanded.
	Valves are available in sizes between ½” and 2” and have zero lift specification and do not require any pressure differential for them to operate.

AR1 Repeater

	The AR1 remote repeater will provide an audio and visual output that mimics the alarm output from the host alarm panel.
	The AR1 also has the capability to onward signal to a autodialler or BMS via an optional volt-free relay contact. Can be used with the FloodStoppa, AquaTek, SMS Alarm, Klaxon Alarm and the SMS Temperature panels.

Solodial Auto Dialler

	The SoloDial automatic dialing unit can dial up to eight different telephone numbers to alert the recipient the alarm has been activated.
	This has a single input which will connect to any volt free contact in the Aqualeak alarm system range. The SoloDial will try each number in sequence until the alarm has been acknowledged.

SMS Alarm Auto Dialler

	The SMS alarm can be used to send text messages to up to five different phones when an alarm is triggered.
	Up to four different devices can be connected to the alarm inputs and a bespoke message for each transmitted. It works with any mobile network SIM card and requires no fixed telephone line to operate making it ideal for working in remote locations.

Beacon-Sounder

	When positioned on the outside of a room or on the outside of a building the beacon/sounder can be used to alert that an alarm has been triggered.
	It has a very load klaxon and a bright flashing light that would be difficult to ignore even from a considerable distance away.

To request more information please complete the form below.

Name:
Email:
Tel No:
Request Info About : AquaTek Water Leak Detector

Our experienced team are here to help. Contact us to discuss your application.

+44 (0)1249 715698

enquiries@aqualeak.com

Mon - Fri
8:00 am - 5:00 pm

terms & conditions

web design by intechnia